3CM-5BG

3cm-5b

Economically designed gross weighing and Bagging System.

Direct filling granular products by gross-weighing system in which filling and weighing are done at the same time. Designed to place bags at fill-chute directly by swing type feeder. Easy operation and maintenance.

Catalog Download

Capacity (bags/hour) Max. 120* (sewing machine speed is 8m/min.)
Bag size (mm) L650~850✕W400~440✕GW76 (paper bag 3~4ply)
Filled weight (kg) 25 (20~30)
Machine weight (kg) Approx. 700

※ Depends on products and bag size.

MACHINE CONSTRUCTION

MACHINE CONSTRUCTION
(1)Bag feeder 50 bags are set on the bag magazine, where the bag mouth is placed at the main body side.
(2)Bag pick-up section The bag is picked-up one by one and turned in 90°toward filling section.
(3)Bag clamp section The both side of the bag is clamped. Automatic bag detector confirms the right position of the bag clamp.
(4)Bag opening section After bag opening by vacuum cup, it will remove away from the bag. At the same time, bag clamp closes each other. Vacuum generator is used for vacuum operation.
(5)Filling section Expanding spout fills products smoothly into the bag. Bag clamp spread out bag at both gusset of the bag after filling finishes.
(6)Weighing section Three load-cells suspend bag clamp and filling section.The automatic zero adjustment is done on the empty bag.
(7)Bag carrier, bag bottom tapper When filling products, bag carrier moves to filling section and bag bottom tapper lifts up the bag bottom to accelerate the filling products.
(8)Bag former After the bag is spreaded, press bars at filling section and bag carrier form good shape of the bag.
(9)Bag clamp finger The clamp bag is carried to sewing machine after bag forming.
(10)Bag sewing machine (Model DS-6AC) Detecting the bag, the sewing machine operates and bag clamp fingers are released. Detecting the end of the bag, the sewing machine stops.
(11)Discharging Bag carrier runs and stops at the fixed position, then the bag is discharged by inclined tapper plate.