Designed to compact and economical. Bag inversion device installed.
Model 3CM-5B is unique type of automatic bagging machine, which carrier table traverse and discharge bags after filling products into bags. It's designed compactly and efficiently for bag feeding, filling products, bag bottom tapping, bag forming, and bag traversing and discharging.
|SPEED||max. 120 bags/hour＊
(sewing machine speed is 6m/min.)
|Bag size (mm)||L750~850×W420×GW76|
|Filled weight (kg)||25, 30|
|Machine weight (kg)||800|
※Specifications subject to change without prior notice.
|(1)Bag feeder||50 bags are set on the bag magazine, where the bag mouth is placed at the main body side.|
|(2)Bag pick-up section||The bag is picked-up one by one and turned in 90°toward filling section.|
|(3)Bag clamp section||The both side of the bag is clamped. Automatic bag detector confirms the right position of the bag clamp|
|(4)Bag opening section||After bag opening by vacuum cup, it will remove away from the bag. Vacuum generator is used for vacuum operation.|
|(5)Filling section||Expanding spout fills products smoothly into the bag.|
|(6)Bag carrier, bag bottom tapper||When filling products, bag carrier moves to filling section and bag bottom tapper lifts up the bag bottom to accelerate the filling products.|
|(7)Bag former, Bag clamp finger||After the bag is spreaded, press bars at filling section and bag carrier form good shape of the bag.|
|(8)Bag sewing machine (Model DS-6AC)||Detecting the bag, the sewing machine operates and bag clamp fingers are released. Detecting the end of the bag, the sewing machine stops.|
|(9)Discharging||Bag carrier runs and stops at the fixed position, then the bag is discharged by inclined tapper plate.|