NEWLONG   
home    policy    outline     engineering unit    network    csr    correspondents    links     update    contact us    sitemap

DS series sewing heads

back  <<<  Page1 --- model DS-2(II)model DS-2Wmodel DS-C
    model DS-6ACmodel DS-7Cmodel DS-9C
  Page2 --- model A seriesmodel A1-PB Series
  Page3 --- model B2
  Page4 --- NP-7ANP-3II


 model  DS-2(II)
model DS-2(II)
SPECIFICATIONS
Head Models DS-2II
Revolution (rpm) 1,400
Stitch range (mm) 7-12
Oiling system manual
Needle DRX2 #25-26
Thread 20/6,20/9
Cutter mechanical

Single needle machine for closing of all kinds of filled bags made of multi-wall paper, PP/PE woven cloth, jute, cotton bags etc. Equipped with mechanically operated continuously running thread chain cutting knives. The operator has to guide the thread chain between these knives for cutting the thread chain at the end of the seam.

 model  DS-2W
model DS-2W
Needle clearance is 6mm between
seams and 6.5mm in feeding direction.

Two-needle machine for plain closing of all kinds of filled bags. This model is a variation of Model DS-2(II), and is recommended to prevent leakage of the product by providing strong double seams.

 model  DS-C
model DS-C
SPECIFICATIONS
Head Models DS-C
Revolution (rpm) 1,400
Stitch range (mm) 7-12
Oiling system manual
Needle DRX2 #25-26
Thread 20/6,20/9
Cutter mechanical

Single needle machine exclusively designed for crepe-tape bound closing of filled bags made of multi-wall paper. Equipped with mechanically operated lever controlled cutting mechanism for automatic cutting of crepe-tape.

Note: Crepe-tape binder for tape width 55mm is included as standard. Special width crepe-tape binders available upon request.

Top of Page

 model  DS-6AC 
model DS-6/DS-6AC
SPECIFICATIONS
Head Models DS-6AC
Revolution (rpm) 1,400
Stitch range (mm) 7-10.5
Oiling system manual
Needle DRX2 #25
Thread 20/6,20/9
Cutter pneumatic

Automatic single needle machine for both plain and crepe-tape bound closing of all kinds of filled bags. The machine will start and stop automatically by a micro-switch lever or photoelectric switch actuated by the bag being fed into the machine. In the same way, the machine stops after the bag passes through, and at the same time the thread/crepe-tape is cut automatically by built-in air cylinder operated guillotine type cutter.

 model DS-7C 
model DS-7A/DS-7C
SPECIFICATIONS
Head Models DS-7C
Revolution (rpm) 1,600
Stitch range (mm) 7.7(fixed)
Oiling system manual
Needle DN-H29 #26
Thread 20/6,20/9
Cutter pneumatic

Automatic swing needle machine specially designed to operate as an integrated part of sealing system such as with the NEWLONG KS Sealers. Features continuous motion feeding; the timed needle moves in epicyclical rotations as the bag passes through the sewing head. Power driven feed rollers ensure accurate feeding of the bag and avoid damage to the sack, which can sometimes be caused by a feed dog. Model DS-7C is equipped with pneumatic guillotine type crepe-tape cutter.

 model DS-9C 
model DS-9
SPECIFICATIONS
Head Models DS-9C
Revolution (rpm) 2,700
Stitch range (mm) 7-10.5
Oiling system automatic
Needle DR-H30 #26
Thread 20/6,20/9
Cutter pneumatic

The fastest single needle bag closing machine (2700 rpm) for all kinds of filled bags. Well-balanced rotational parts ensure very little vibration. Ideally suited for use with height-speed bag filling lines where conveyor speed of 25m/min. Interchangeable with most existing sewing heads. All parts are protected against the effects of dust. A unique but simple enclosed oil bath lubrication system greatly extends the life of moving parts and reduces maintenance costs. Model DS-9C is equipped with pneumatic guillotine type crepe-tape cutter.


home | policy | outline | engineering unit | network | csr | correspondents | links | update | contact us | site map | Top of Page   
NewlongNEWLONG MACHINE WORKS, LTD
4-14, Higashi-ueno 6-chome, Taito-ku, Tokyo 110-0015, Japan  Fax.+81-3-3843-0260 Tel.+81-3-3843-0269 overseas@newlong.com