NEWLONG   
home    policy    outline     engineering unit    network    csr    correspondents    links     update    contact us    sitemap
@

Air Shafts

Large Torque Rotation with High Precision and Tension.
Sinplifies All Winding Operations

Products | New Products | Structure & Features | Reference | Back


Parallel / Zig-Zag Lug Type

The lugs in these standard types are arranged in parallel or zig-zag. The large contact area holds the core firmly to allow high torque rotation.

The zig-zag type, with the lugs arranged continuously, is especially suitable for slitrewinders.



Leaf Type

The shaft as a whole expands and contracts, and is suitable for coreless or multiple-core (slitter,etc) applications. The torque is uniform across the face width (lower torque transmission than the parallel lug type).



Cantilever Type

The core can be removed with ease without lifting the shaft because the shaft is normally mounted on the converting machine.

The parallel, zig-zag, and leaf types can be used.



CFRP Shaft Type

The shaft is made of complex plastic materials reinforced by carbon fiber reinforced plastics (CFRP) and carbon fibers.These materials are ideal for super-lightweight airshafts having low moment of inertia and high rigidity.

The super-lightweight airshafts are easy to handle, improving operation efficiency (the shaft weight is approx. 1/5 taht of a steel shaft).



Cavity Shaft Type

The cavity shaft accepts web shafts of max.30 mm diameter, in case of core internal diameter of 3 inches. The shaft shall be fixed on web shaft, and insert into web core.



Air Adapter

The size of the existing airshafts is increased by mounting the air adapter without increasing the weight significantly.

The weight of a 3 "airshaft with 6" adapters is about one-half that of a 6 " air shaft (various sizes available on request).



Nylon Adapter

The adaptor is made of nylon materials. The weight decrease 20% against the former air adaptors.



Air Hanger

The air hanger is used to handle cylinders, etc.more efficiently and smoothy. It is inserted into a web roll placed upright. With air supplied, the serrated lugs bite firmly into the core allowing lift of the roll. The web roll surface is kept intact because the paper roll is not clamped for lifting..



Slide Chuck

The shaftless slide chuck reduces cost and improves work effiiciency. Instead of the conventional linear contact by taper cones, the slide chuck uses the surface contact for positive core clamping and torque transmission. The mechanical slide chuck requires no maintenance.

3",4",6",9",12"
(various sizes available on request)



Core-less Air Shaft (Leaf Type)

Web clumping method is applied on leaf type airshaft. Then, it is possible for the airshaft to make winding operation in core less web.



AS Carrier

The AS carrier is recommended for handling heavy rolls and shafts. The weight of the shaft is supported by the AS carrier. Shafts that were usually transported by several operators can now be transported by a single operator. An hydraulic oil pump or motor is used for lifting the table

Max.load : 150kg (hydraulic pump), 200kg (motor)
Shaft dia. : 75 to 180 mm
Min height : 150mm
Lift : 500m

 

E mail
overseas@newlong.com



home | policy | outline | engineering unit | network | csr | correspondents | links | update | contact us | site map | Top of Page   
NewlongNEWLONG MACHINE WORKS, LTD
4-14, Higashi-ueno 6-chome, Taito-ku, Tokyo 110-0015, Japan  Fax.+81-3-3843-0260 Tel.+81-3-3843-0269 overseas@newlong.com